⛲👨‍🔬 Tutorial on making a tubewell with cardboard and color paper. ⛲👨‍🔬

Friends,Grettings everyone

https://youtube.com/shorts/5Z0sF8ZLrLw?si=oO9m-ie5iQiddOLL

Nesesurry equipment

👨‍🔬Scissors
👨‍🔬Cardboard
👨‍🔬anti Carter
👨‍🔬Fevicol glue
👨‍🔬Glitter paper
👨‍🔬Colour paper
👨‍🔬2B pencil dark
👨‍🔬Glue gun

First I took a cardboard of size 16×21.Cut the cardboard with scissors and make a beautiful design.

Here I have drawn using Tubby pencil on top of cardboard.Here I will try to show six cardboard pieces later.

According to that drawing, I cut with scissors with great feeling.

Here you can see six pieces of cardboard.With these six around we will create a faucet with a beautiful design.

Here we have started attaching the cardboard pieces by using glue gun with great feeling by putting another cardboard on top of 1.

Here you can see all the cardboard squares completed with great feel.

Here I have made a circle by applying Favicol glue on a color paper.Later, I cut the color paper and cut it.After that I made a cardboard round.Next, I attached the round cardboard to the inside of the color paper using Favicol glue.

Here I have attached a colored paper to the cardboard on the edge of the faucet.Next, I cut the round color paper with scissors and attached three round color papers.which shows the shape of the body.Next I cut a piece of cardboard down the middle with an Andy cutter.And rounded up a different color paper.

After that I took two pieces of card board and attached the color paper to the cardboard.

Later I tried to show another design by adding a color paper at the bottom.

After that I am trying to show you all by attaching a green color paper here.

Next I attached the body of the tubewell made to the paper pipe.

Here I have made two dainties with color paper on the body on both sides of the tubewell with great feeling.

Here I have made a nice drawing of the stem shape of the tubewell on a piece of cardboard with a To B pencil.

Then according to the drawing, I cut it beautifully with scissors.

After that I attached the colored paper to the tubewell's dente and made a beautiful design.

Here you can see the advantage of tubewell with color paper added.

Here I have completed the great design by adding color paper which shows the beautiful design on the two heads of the danti.

Here I have rolled a color paper. Later, I stuck it with Favicol glue. After that, I made the tube of the tubewell by cutting it with scissors. Cut a color paper round and cut a hole in the middle. Next, I inserted the round paper with the tap washer in the middle part.

Here I completed my today's tubewell construction by fitting the tube with tubewell danti. Glugan helped me a lot with the color paper cardboard and holding the favicon.

Here I have showcased a selfie with this amazing tubewell with great feeling.