Simple Handmade Antique clean water Fountain Using Cardboard.

Friends,Grettings everyone

Here I am promoting the name with the necessary equipment with great feeling.Which helps in making a nice fountain.

🚿Clay
🚿Water
🚿Straw
🚿Brashes
🚿Compass
🚿Glue gun
🚿Scissors
🚿Cardboard
🚿PP plastic
🚿Fevicol glue
🚿Acrylic colour
🚿2B pencil dark
🚿Plastic lead 2
🚿Different color stone

First I took all the necessary tools at hand and drew a nice rounded circle with a plastic lead and a 2B pencil.

Here I have presented to you all with round circle cardboard.

After that I have drawn with scale in one third part.

Then I cut it out beautifully with scissors according to the drawing with great feeling.

Here I have cut a long 7×22 cm cardboard with scissors.

Then I attached it to a piece of colored paper with great felt using Favicol glue and twisted it.

Here we have taken a cardboard with great feel by using plastic lead and drawing with Tubby pencil. Later I cut according to that drawing. Beautiful design will inspire you to create a fountain.After that you can see that the cardboard is ready. We've taken it to scale.Next, I attached the top beautiful design cardboard to the bottom cardboard using glue gun.

Here I have painted beautiful shapes of coffee color and blue color by using acrylic color and brush with great feeling.

Here I made a great hole by using a compass.Here I will attach a pipe later.

Here I have taken the above color paper patched cardboard.Later, it was stuck into a round shape by using Glugan.

Here you can see the cardboard with round design dito color paper.

Here I have taken the beautifully designed forum design and added a straw. Later on the top part of the round cardboard I have beautifully architected the design of the fountain.

Here I have drawn with round cardboard to be pencil with plastic lead. Later cut according to that figure. Here I have attached color paper by applying fevicol glue.

Here you can see the round cardboard with color paper attached.I usually make it to the bottom of the fountain.

Here I cut PP polyethylene in half to use for water storage with great feeling.

On the inside of the forum I setup the polythene with great feel and by using Fabical glue.

Next I attached the bottom piece of cardboard using glue gun.

Here I have attached different colored stones to the inside of this wonderful fountain.

Here we have poured water on the inner part of the beautiful fountain. Which amount of water.

Here I have attached different colored stones to the upper part of the forum with great feeling.

Here I have combined two colors of clay. Next I made a nice design with scissors. After that you can see a wonderful flower is formed. A round yellow clay is taken. Later I placed the flower there. We attached the round clay flower to the side of the stone at the top of the forum. Here is a sample of how to save clean water and nature from a fountain.

Here I have showcased a selfie with an extraordinary feeling.