Pendant Idea with Modelling Clay Inspired by "NOXIC"

‎

‎

So let's prepare its beautiful shapes by adding Modelling clay and acrylic colors. Although these strong Modelling clays are soft at first. Using which I had to wait for 24 hours to dry. After 24 hours of drying, the shape of the wings and body structures of all the animals will be very strong. Exactly after 24 hours I can make its colors great by using acrylic colors.

• Screenshot Reference by

Here I am trying to show Modelling clay materials including all the colors and varnishes along with the necessary materials.
‎

‎🌺Modelling clay
🌺Favicryl acrylic colours
🌺Brushes
🌺Gesso
🌺Clay varnish
#Glue B-7000
#plastic lead
‎#bamboo stick
#plastic instrument

Here I will show all the materials used step by step and complete the author's work, including coloring scenes.
‎

‎

Next, I took a little more Modeling Clay in the same way. Then I flattened the round shapes and prepared the shape of the lower part of the wings. Later, I connected the cut spots. Using plastic instruments, our four total wings of the butterfly or noxic creature were made.

Next here I took some more Modeling Clay with great feeling. Later I made the round long which will show the shape of the animal's body. Then I prepared the shape of its horns using two bamboo sticks. And I prepared the shape of the complete body by making two beautiful eye shapes.
‎

Here I have made a cut shape mark with great feeling on the upper part of the animal's body using plastic instrument. You can see it in the exhibition. Also, I have stuck the eye part using Fevicol glue. Although I did not have B-7000 glue at that time. So I did the normal operation using Fevicol glue.

Next, I attached the two wings of the upper part of the noxic creature with great feeling using Fevicol glue.
‎

Then, with great feeling, I attached the two lower wings using Fevicol glue.

Then I made four beautiful furry shapes of the animal with long, thin fur using Modeling Clay. I completed this step using a special scale.

‎

Later, I completed all the steps by using Modeling Clay and attached the four woolen balls. After that, I left it in a separate place for 24 hours to dry. Later, I collected B-7000 glue and attached the shapes around the grains well.

Then I made the great shapes of the noxic creature beautiful and elegant using B-7000 glue. Later I made it mostly white using Clay varnish using a brush. And dried it.
‎

Here, first I took a single league color. Later, by using acrylic black color on the sharp side, I made the colors beautiful and elegant, leaving the middle part empty.
‎

Then I added a beautiful design in the middle part with a great feel using light pink color and colored it. All the activities of the animal are completed by coloring it. Let's follow the final step.

‎

I hung this wonderful #noxic animal butterfly around my daughter's neck with a thread. But after making this wonderful animal,I got into a lot of thinking.How to display the butterfly in order to inspire this noxic animal.Finally,I hung it around my daughter's neck to display its beauty and inspire the animal.
‎
‎